产品描述:GE Fanuc IC695CPU315-CE IC693CPU374-JF_CPU Control Module, 1GHZ, 20M Memory, 2 Serial Port_Liyuan Tech
Brand: GE Fanuc Part Number: IC695CPU315-CE IC693CPU374-JF Series:RX3i PACSystems Product Type:CPU Program Storage:20 MB of RAM, 20 MB of flash memory Power Requirements:3.3V DC and 1 Amp, 5V DC and 1.2 Amp Embedded Communications Ports:RS-232, RS-485 Serial Protocol Support:Modbus RTU Slave, SNP, Serial I/O protocols Program Blocks:Up to 512 program blocks Operating Temperature:0-60 degrees Celsius CPU Performance:For CPU315 performance data, refer to Appendix A of the PACSystems CPU Reference Manual, GFK-2222W or later. Battery: Memory retention:For battery selection, installation and estimated life, refer to the PACSystems RX3i and RX7i Battery Manual, GFK-2741 Program storage:Up to 20 MB of battery-backed RAM,20 MB of non-volatile flash user memory Power requirements:+3.3 Vdc: 1.0 Amps nominal,+5 Vdc: 1.2 Amps nominal Operating Temperature:0 to 60°C (32°F to 140°F) Floating point:Yes Time of Day Clock accuracy:Maximum drift of 2 seconds per day Elapsed Time Clock (internal timing) accuracy:0.01% maximum Embedded communications:RS-232, RS-485 Serial Protocols supported:Modbus RTU Slave, SNP, Serial I/O Backplane:Dual backplane bus support: RX3i PCI and high-speed serial bus PCI compatibility:System designed to be electrically compliant with PCI 2.2 standard Program blocks:Up to 512 program blocks. Maximum size for a block is 128KB. Memory:%I and %Q: 32Kbits for discrete,%AI and %AQ: configurable up to 32Kwords %W: configurable up to the maximum available user RAM Symbolic: configurable up to 20 Mbytes The IC695CPU315 is a 1 GHz Central Processing Unit from the GE Fanuc PACSystems RX3i Series. It has an Intel Celeron-M microprocessor with 20 MB of user memory (also known as random access memory or RAM) and 20 MB of flash storage memory. As a programmable controller, the IC695CPU315 is capable of up to 32K I/O operations per second. It supports up to 512 program blocks at a maximum size of 128 KB per block. The IC695CPU315 communicates with I/O and Intelligent Option modules using a dual backplane bus. RX3i CPUs like this one are designed for real-time control of machines, processes, and material handling systems. They can be programmed in C, or in three of the five programming languages recognized by the IEC (International Electrotechnical Commission). From the IEC language list specifically, you can program IC695CPU315 in Ladder Logic (Ladder Diagram), Structured Text, or Function Block Diagram languages. Only the Sequential Function Chart and Instruction List language options do not apply. IC695CPU315 uses floating point algorithms, and its firmware can be upgraded within the system. Auto-located Symbolic Variables can use as much memory as they need, up to the full 20 MB capacity of user memory. The CPU comes factory-configured with two front=facing ports, an RS-485 serial port and an RS-232 serial port. Accordingly, you have both a 9-pin connector and a 15-pin connector. The CPU supports the SNP, Serial I/O, and Modbus Slave and Master serial protocols. IC695CPU315 also supports most of the older GE Fanuc Series 90-30 modules and expansion racks. Transceiver Products Supplied by Liyuan Tech Main Brands: SIEMENS, Allen-Bradley, Alcatel, Nokia, Finisar, Ciena, Mellanox, Brocade,Cisco , Infinera, Ericsson, DELL, HPE, Juniper, ADVA, HUAWEI, ZTE, etc. Models:1.25G-10G-16G-25G-40G-100G-200G-400G-800G, SFP/SFP+/QSFP+/QSFP28/QSFP56/CFP/CFP2/CFP4/QSFP-DD In addition to GE Fanuc IC695CPU315-CE IC693CPU374-JF,Liyuan Tech supply a wide range of other GE Fanuc Series, If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com