Product description: AVAGO AFBR-57H5MZ AFBR-57H5MZ-EL1__64GFC SFP56 for Multi-Mode Optical Fiber Digital Diagnostic SFP, 850-nm, 64G/32G/16G_Liyuan Tech
Manufacturer: AVAGO Part Number: AFBR-57H5MZ AFBR-57H5MZ-EL1 Speed: 64GBase Form Type: SFP56 Wavelength: 850nm Reach: 100M Transceiver Type: SR Connector: Duplex LC Media: MMF DDM/DOM: Supported peed Description: 64-Gigabit Compliant to RoHS directives Broadcom's high-performance 850-nm Vertical Cavity Surface Emitting Laser (VCSEL) and PiN diode Class 1 eye safe per IEC60825-1 and CDRH Wide temperature range (0°C to 75°C) LC duplex connector optical interface conforming to ANSI TIA/EIA604-10 (FOCIS 10A) Diagnostic features per SFF-8472, "Diagnostic Monitoring Interface for Optical Transceivers" Enhanced operational features including EWRAP, OWRAP, and adaptive electrical EQ/emphasis settings Integrated PRBS generator and bit error rate checker Real time monitoring of the following: Transmitter average optical power Received average optical power Laser bias current Temperature Supply voltage Power-on hours SFP+ mechanical specifications per SFF-8432 SFP+ compliant low-speed interface per SFF-8419 Fibre Channel FC-PI-7 compliant high-speed optical and electrical interface Fibre Channel switches Fibre Channel host bus adapters Fibre Channel RAID controllers Port-side connections Inter-switch or inter-chassis aggregated links Commercial Temperature Range: 0 to 70°C (32 to 158°F) Country of origin: MALAYSIA The Broadcom AFBR-57H5MZ optical transceiver supports high-speed serial links over multi-mode optical fiber at signaling rates up to 57.8 Gb/s PAM4 (the serial line rate of 64GFC). The product is compliant with Small Form Pluggable SFP+ industry agreements for mechanical and low speed electrical specifications. High-speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-7. The AFBR-57H5MZ is a multi-rate 850-nm transceiver that ensures compliance with FC-PI-7 64GFC, 32GFC and 16GFC specifications. Per the requirements of 64GFC, internal clock and data recovery circuits (CDRs) are present on both electrical input and electrical output of this transceiver. These CDRs lock at 57.8-Gb/s PAM4, 28.05-Gb/s NRZ and 14.025-Gb/s NRZ (64GFC, 32GFC, and 16GFC) accomplished by using two Rate Select inputs and I2C to configure transmit and receive sides. Digital diagnostic monitoring information (DMI) is present in the AFBR-57H5MZ per the requirements of SFF-8472, providing real-time monitoring information of transceiver laser, receiver and environment conditions over an SFF-8431 I2C interface. Transceiver Products Supplied by Liyuan Tech Main Brands: Alcatel, Nokia, Finisar, Ciena, Mellanox, Brocade,Cisco , Infinera, Ericsson, DELL, HPE, Juniper, ADVA, HUAWEI, ZTE, etc. Models:1.25G-10G-16G-25G-40G-100G-200G-400G-800G, SFP/SFP+/QSFP+/QSFP28/QSFP56/CFP/CFP2/CFP4/QSFP-DD In addition to AVAGO AFBR-57H5MZ AFBR-57H5MZ-EL1 , Liyuan Tech supply a wide range of other Optical transceiver transceivers. If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com