Cisco Series

  • Cisco A9K-8X100G-TR
Cisco A9K-8X100G-TR

Cisco A9K-8X100G-TR

  • Product description: Cisco A9K-8X100G-TR_ASR 9000 8-Port 100 Gigabit Ethernet Line Cards Data Sheet_Liyuan Tech
  • INQUIRY
Brand : Cisco
Part Number: A9K-8X100G-TR
Chassis compatibility: Compatible with the Cisco ASR 9006, ASR 9010, ASR 9904, ASR 9906, ASR 9912 and ASR 9922 chassis
Port density: 4-ports and 8 ports of 100 Gigabit Ethernet per line card
Ethernet: 100-Gbps IEEE 802.3ba compliant, 100 Gigabit Ethernet PHY monitoring, IEEE 802.x flow control, Full-duplex operation
Per-port byte and packet counters for policy drops; oversubscription drops; Cyclic Redundancy Check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
Performance: 100-Gbps line-rate throughput per port
Options: Each line card is available as either a service edge optimized (enhanced QoS) or packet transport optimized (basic QoS) line card
Reliability and availability: Line card Online Insertion and Removal (OIR) support without system impact
Physical dimensions (H x W x D); weight: 8-port 100 Gigabit Ethernet Line Card: 14.5 x 1.63 x 22.02 in.; 28 lb (est.) (368.3 mm x 41.4 mm x 559.3 mm; 12.7 kg)
4-port 100 Gigabit Ethernet Line Card: 14.5 x 1.63 x 22.02 in.; 28 lb (est.) (368.3 mm x 41.4 mm x 559.3 mm; 12.7 kg).
Operating temperature: 41 to 104°F (5 to 40°C)
Operating humidity (nominal) (relative humidity): 10 to 85%
Storage temperature: –40 to 158°F (–40 to 70°C)
Storage (relative humidity): 5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air
Operating altitude: –60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)
The Cisco ASR 9000 Series 4-port Line Card and 8-port 100 Gigabit Ethernet Line Cards deliver industry-leading high density, with line-rate 100 Gigabit Ethernet ports,
to any slot of a Cisco ASR 9000 Series Aggregation Services Router. These high-capacity line cards are designed to remove bandwidth bottlenecks in the network that are caused by a large increase in Video-on-Demand (VoD),
IPTV, point-to-point video, Internet video, and cloud services traffic. A single 100 Gigabit Ethernet port can now replace large 10 Gigabit Ethernet link aggregation bundles to simplify network operations.
Based on Cisco CPAK™ technology, this line card has flexible interfaces that support 100 Gigabit Ethernet, 40 Gigabit Ethernet and 10 Gigabit Ethernet modes,
so it gives customers the flexibility to mix and match interface types on the same line card.
For example, with the help of Cisco CPAK 10x10G-LR optics, a single 100 Gigabit Ethernet port can be divided into 10x10 Gigabit Ethernet ports using breakout cables or patch panels for unprecedented density and scale.
These different interface modes can be configured easily through the Command Line Interface (CLI) without resetting or restarting the line card. Using a “green design,”
these line cards also let customers put an unused slice in power-saving mode to reduce power consumption. With these capabilities,
the ASR 9000 Series line cards (Figure 1 and Figure 2) and routers provide the fundamental infrastructure for scalable Carrier Ethernet and IP/Multiprotocol Label Switching (IP/MPLS) networks,
promoting profitable business, residential, and mobile services.
Both the ASR 9000 Series 4-port and 8-port 100 Gigabit Ethernet line cards are fully compatible with Cisco ASR 9006 Router, ASR 9010 Router, ASR 9904 Router, ASR 9906 Router, ASR 9910 Router,
ASR 9912 Router, and ASR 9922 Router. However, their chassis may require a hardware update for the cooling and power systems, because the line cards offer industry-leading, high-density 100 Gigabit Ethernet throughput.
The 4-port and 8-port line cards are both designed to support full line rate in non-oversubscribed fashion.
In fact, the line cards set a new standard for Layer 2 and Layer 3 service density and scale, allowing operators to offer highly predictable, managed transport services while optimizing the use of network assets.
The 10x10G Cisco CPAK breakout option further increases the capability of each line card to support large-scale aggregation, Data Center Interconnect (DCI),
and the 10 Gigabit Ethernet Satellite Network Virtualization (nV) System mode on the ASR 9000 Series Router. These versatile capabilities help operators qualify and stock one type of line card that can be deployed in any combination of Layer 2,
Layer 3, DCI, or aggregation applications, thereby reducing capital expenditures (CapEx) and operating expenses (OpEx), as well as reducing the time required to develop and deploy new services.
The ASR 9000 Series can extend 100 Gigabit Ethernet transport over an IP-over-dense-wave-division-multiplexing (IPoDWDM) network when used with the Cisco ONS 15454 DWDM transponder solution.
Distances of up to 3000 kilometers can be achieved while using the optical protection capabilities of the DWDM network.
Table 1 lists the features and benefits of the Cisco ASR 9000 Series line card. Specific feature and scale support is hardware and software dependent.
Transceiver Products Supplied by Liyuan Tech
Main Brands: Alcatel, Nokia, Finisar, Ciena, Mellanox, Brocade,Cisco , Infinera, Ericsson, DELL, HPE, Juniper, ADVA, HUAWEI, ZTE, etc.
Models:1.25G-10G-16G-25G-40G-100G-200G-400G-800G, SFP/SFP+/QSFP+/QSFP28/QSFP56/CFP/CFP2/CFP4/QSFP-DD
In addition to Cisco A9K-8X100G-TR , Liyuan Tech supply a wide range of other Cisco Series transceivers. If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com