Optical transceiver
Dell Q56DD-400G-EDR4
- Product description: Dell Q56DD-400G-EDR4 _400Gbps PAM4 QSFP-DD 400GBASE-EDR4 1310nm 2km SMF MTP/MPO-12 APC DDM/DOM Optical Transceiver Module_Liyuan Tech
-
Brand: Dell
Part Number: Q56DD-400G-EDR4
DP/N:06MGDY
EOLD-134HG-02-M6D
Form Factor: QSFP-DD
Max Data Rate: 400Gbps
Max Distance: 2km
Wavelength: 1310nm
Connector: MTP/MPO-12 APC
DDM/DOM: Support
Media: SMF
Transmitter Type: 4x EML
Receiver Type: PIN
Transmitter Power: -2.4 to 4dBm
Receiver Sensitivity: < -6.4dBm
Extinction Ratio: 3.5dB
Receiver Overload: 3.5dBm
Transmitter and Dispersion Eye Closure Quaternary: 3.4dB
Power Budget: 4dB
OE Packaging: COB Packaging
Signal Conditioner: DSP for TX and RX
Electric Signal: 8x50G
Optical Signal: 4x100G
Modulation Format: PAM4
Host FEC: Support
Power Consumption: 12W
Commercial Temperature Range: 0 to 70°C (32 to 158°F)
Dell Q56DD-400G-EDR4 transceiver is a parallel road 400 GBPS four small size pluggable double density QSFP - DD module, suitable for 400 gbase Ethernet network. The QSFP-DD EDR4 delivers 425Gb/s throughput over single-mode fiber (SMF) up to 2km, with the host FEC using the 1310nm wavelength.
The transceiver is fully compliant with the QSFP-DD Multi-Source Protocol (MSA), IEEE 802.3b 400GBASE-EDR4 and 400gai-8 standards. The electrical interface adopts MSA76 pin edge connector, and the optical interface adopts MTP/MPO-12 APC connector. The full-duplex QSFP-DD transceiver enables four separate 106.26Gbps PAM4 transmit and receive signal channels in each fiber,
According to the total rate of 425 GBPS. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) supports real-time performance monitoring via a 2-wire (TWI/I2C) interface.
In addition to Dell Q56DD-400G-EDR4 , Liyuan Tech supply a wide range of other Optical transceiver transceivers. If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com
∷
