Finisar Series

  • FINISAR FTL410QE4C
FINISAR FTL410QE4C

FINISAR FTL410QE4C

  • Product description: FINISAR FTL410QE4C_40BASE SR4 QSFP Gen4 850nm MMF 150M Optical Transceiver_Liyuan Tech
  • INQUIRY
brand: FINISAR
PN: FTL410QE4C
Rate Category:  40GBase 
Interface Type:  SR4  
Form Factor:  QSFP   
TX Wavelength:  850nm    
Reach: 150m      
Cable Type: MMF     
 DDM:  Yes   
Connector Type:  MPO   
Optical Power Budget:  1.9dB
TX Power Min/Max:   -7.6 to +2.4 dBm
RX Power Min/Max:  -9.5 to 2.4 dB 
4 independent full-duplex channels, up to 11.2Gbps data rate per channel 
MTP/MPO optical connector 
QSFP+ MSA compliant 
Digital diagnostic capabilities 
Capable of over 100 m transmission on OM3 multi-mode ribbon fiber 
CML compatible electrical I/O 
Power Dissipation < 1.5W 
Single +3.3V power supply 
XLPPI electric interface (with 1.5W Max power) 
RoHS-6 compliant 
Operating case temperature:  o Standard: 0 to 70oC ,  o Industrial : 0 to 70oC -40 to +85 oC 
The Finisar FTL410QE4C QSFP+ transceiver is based on our 40G-QSFP-150 product, which is manufactured with the same parameters and the same industry standards as its peers. The module version is designed to operate through dual-fiber multi-mode fiber (MMF) cables. It has a minimum guaranteed light budget of 1.9 dB, which is usually enough to reach about 100 meters on OM3 fiber,
Up to 150 m on OM4 or higher MMF class fiber. However, distance is only an indicative parameter calculated for the purpose of identifying comfort. Finally, we calculate the distance keeping in mind the minimum (guaranteed) light budget and the average attenuation of the cable in the industry. Our Finisar FTL410QE4C-compatible transceivers use a high-quality VSCEL laser transmitter operating at a nominal wavelength of 850 nm and an 850 nm PIN photodiode receiver. The module supports DDM/DOM optical diagnosis,
And provide diagnostic data about current working conditions. The compatible module features MTP/MPO connectors and is designed to operate in a standard temperature network environment of 0°-70°C. The transceiver chipset supports data rates up to 44.8 Gbps and applications such as 40G Ethernet (41.25Gbps), STM-256 (39.81 Gbps), OTU3 (43.01Gbps), OTU3e2 (44.58Gbps). It is important to note that the above application support will vary depending on the port used for the module,
And the applications it supports during the ordering process as well as the module speed configuration, but we can be sure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different locations in today's network. Therefore, Internet service providers (ISPs) fiber to home aggregation and backbone networks,
Mobile operator core networks as well as mobile backhaul and data center network site interconnections are the most popular applications for this product.
In addition to FINISAR FTL410QE4C , Liyuan Tech supply a wide range of other FINISAR optical transceivers. If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com