Finisar Series

  • FINISAR FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL
FINISAR FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL

FINISAR FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL

  • Product description: FINISAR FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL _25GB SR SFP+ 850nm 100m DOM Duplex LC MMF Optical Transceiver Module_Liyuan Tech
  • INQUIRY
Brand Name: FINISAR
Model Numbers: FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL
Form Factor: SFP+
Rate Category: 25GBase
Interface Type: SR
Wavelength: 850nm
Reach: 100m
Cable Type: MMF
Connector: Dual-LC
DDM: DDM
DOM: DOM
Application: Ethernet
Product Category: Fiber Optic Transmitters, Receivers, Transceivers
Emitting Source: VCSEL
Operating Supply Voltage: 3.3 V
Minimum Operating Temperature: 0 C
Maximum Operating Temperature: + 70 C
Compliance: IEEE 802.3by, RoHS-6, SFF-8432, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, SFF-8402, SFF-8431, SFF-8472, SFP+ MSA
The Finisar FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL,SFP28 transceiver is based on our 25G-SFP28-100 product and is manufactured to the same industry standards. For operation through dual-fiber multi-mode fiber (MMF) cable. It has a minimum guaranteed optical budget of 2.6 dB,
It is usually sufficient to reach about 3 meters through OM70 type fiber, or 4 meters through OM100 or higher MMF type fiber. However, distance is only an indicative parameter calculated for the purpose of identifying comfort. Finally, we calculate the distance keeping in mind the minimum (guaranteed) light budget and the average attenuation of the cable in the industry.
Our Finisar FTLF8536P4BCL-compatible transceiver uses a high-quality VSCEL laser transmitter operating at a nominal wavelength of 850 nm and an 850 nm PIN photodiode receiver. The module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. The compatible module has dual LC connectors,
The module is designed to operate in a standard temperature network environment of 0°-70°C. The transceiver chipset supports data rates in the 8.5-28.1 Gbps range and applications such as 25G Ethernet (25.78Gbps) and 10G Ethernet (10.31Gbps). It should be noted that the above application support will vary depending on the port of the module used,
And it supports module speed configuration in the application as well as in the ordering process, but we can ensure that the optical module supports at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today's network. Therefore, Internet service providers (ISPs) fiber to the home aggregation and backbone networks,
Mobile operator core networks as well as mobile backhaul and data center network site interconnections are the most popular applications for this product.
Finisar FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL  SFP+ transceivers are designed for use in 25Gb/s data rate
over multimode fiber.  They are compliant to IEEE802.3by, SFF-8472 Rev 12.2b and
SFF-8402g, and compatible with SFF-8432a and applicable portions of SFF-8431 Rev.
4.1c.   The transceiver is RoHS compliant and per Directive 2011/65/EUd . See Finisar
Application Note AN-2038 for more details.
Transceiver Products Supplied by Liyuan Tech
Main Brands: Alcatel, Nokia, Finisar, Ciena, Mellanox, Brocade,Cisco , Infinera, Ericsson, DELL, HPE, Juniper, ADVA, HUAWEI, ZTE, etc.
Models:1.25G-10G-16G-25G-40G-100G-200G-400G-800G, SFP/SFP+/QSFP+/QSFP28/QSFP56/CFP/CFP2/CFP4/QSFP-DD
In addition to FINISAR FTLF8536P4BCL FTLF8536P4BCV FTLF8538P4BCL , Liyuan Tech supply a wide range of other Finisar transceivers. If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com