Brand: GE Fanuc Part Number: IC695CPE305 IC695CPE305-ABAB IC695CPE305-ABAC IC695CPE305-ABAD IC695CPE305-ABAH IC695CPE305-ABAL IC695CPE305-ACAN IC695CPE305-ADAN IC695CPE305-BAAA IC695CPE305-AEAT IC695CPE305-AFAT IC695CPE305-AFAZ IC695CPE305-AFBA IC695CPE305-AGBD IC695CPE305-AHBD IC695CPE305-BAAA IC695CPE305-BCAB IC695CPE305-RGBD Series: RX3i PacSystem Product Type: CPU module Compatibility: PACSystems RX3i Clock Speed: 1.1 GHz RAM: 5MB NVRAM: 10MB Switchover time: Maximum 1 logic scan, minimum 3.133 msec. Serial Ports: 2 Communication standards: RS232; RS485 Ethernet Port: One (1) Maximum Program Blocks: 512 Maximum Block Size 128 kilobytes Operating Temperature: 0 to 60 degrees Celsius Batteries: IC695ACC302 Lithium Smart Battery IC693ACC302 Series 90-30 Auxiliary Battery Module IC698ACC701 Smart Coin Cell Battery Pack Product Description: PACSystems RX3i CPU Number of Slots: 1 Number of Local Racks: 8 Program Storage: 5 MB of User Memory Type of Memory Storage: SRAM, Flash Processor Speed: 1.1G Hertz Power Requirements : 1 Amp at +5 and +3.3 Volts DC, 0.5 Amps at +24 Volts DC Floating Point: Yes Serial Communication: RS-232 Ethernet Port: Yes Protocol Support: Modbus RTU Slave, SNP, Serial I/O Backplane: Universal backplane The IC695CPE305 Programmable Automation Controller (PAC) is part of the PACSystems RX3i automation platform. This controller is manufactured by then GE Fanuc Automation which is now Emerson Automation. The IC695CPE305 has advanced features that is superior to most PACs of today. This controller features Ethernet communication capability via the One (1) Ethernet communication port that support 10/100 Mbps , communication rate which may be used to communicate with Programming workstation, Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA) systems, 3rd party hardware and software products as well as controllers of the same platform for messaging and inter-controller data exchange. Additionally, the Ethernet port supports OPC UA, which allows connection to 3rd party devices via OPC protocol. The IC695CPE305 is not limited to Ethernet communication as this controller is also integrated with Two (2) serial ports that support the RS232 and RS485 communication standard. It is also equipped with One (1) , USB 2.0 master port that allows downloading and uploading of user program from a thumb drive of Smart Phone. The IC695CPE305 5MB RAM and 5MB non-volatile user memory, processor speed of 1.1 GHz with typical scan rate of 0.72 ms per 1000 Boolean instructions. It supports a variety of network capable protocols such as Ethernet (PROFINET, Ethernet Global Data, Channels, Modbus TCP Server and Client), Genius, PROFIBUS DP, DeviceNet. Up to a maximum of Eight (8) racks is permitted to be controlled by the IC695CPE305, including the CPU rack. This controller supports installation of additional communication cards that support Serial, Genius, CMX (Reflective Memory), and Ethernet. This single-slot controller and support up to 8 local racks. The IC695CPE305 RX3i Central Processing Unit or CPU is designed to be electrically compliant with the PCI 2.2 standards. It is compatible with a universal backplane, RX3i Series PCI devices, and GE Series 90-30 style serial devices. The power requirements of the module are 1 Amp at 5 Volts DC, 1 Amp at 3.3 Volts DC, and 0.5 Amps at 24 Volts DC. It supports the SNP Slave, Serial I/O, and Modbus RTU Slave serial protocols. The specifications of the Ethernet interface are programmer connections, 10Mb/sec and 100Mb/sec Ethernet data rates, the 10 BaseT RJ-45 configuration, and remote station manager over the UDP. The IC695CPE305 CPU can be installed in any pair of slots in the RX3i main rack except the highest numbered slots. The CPE310 controllers can be easily swapped with CPED305 controllers which fit is capable , of accommodating the existing user program in the processor. In order to configure the module, the Proficy Machine Edition Logic Developer 7.0 SIM 3 or later software is required. Transceiver Products Supplied by Liyuan Tech Main Brands: SIEMENS, Allen-Bradley, Alcatel, Nokia, Finisar, Ciena, Mellanox, Brocade,Cisco , Infinera, Ericsson, DELL, HPE, Juniper, ADVA, HUAWEI, ZTE, etc. Models:1.25G-10G-16G-25G-40G-100G-200G-400G-800G, SFP/SFP+/QSFP+/QSFP28/QSFP56/CFP/CFP2/CFP4/QSFP-DD In addition to GE Fanuc IC695CPE305 IC695CPE305-ABAB IC695CPE305-ABAC IC695CPE305-ABAD IC695CPE305-ABAH IC695CPE305-ABAL IC695CPE305-ACAN IC695CPE305-ADAN IC695CPE305-BAAA IC695CPE305-AEAT IC695CPE305-AFAT IC695CPE305-AFAZ IC695CPE305-AFBA IC695CPE305-AGBD IC695CPE305-AHBD IC695CPE305-BAAA IC695CPE305-BCAB IC695CPE305-RGBD,Liyuan Tech supply a wide range of other GE Fanuc Series,If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com