Huawei TNF6HSNS4T65 TNZ8NS4 TNZ5UNQ2 TNF1LDCAT23 TNF1LDCAT22 TNF3LTX01 TNF2ELOM TNF1DFIU03 TMB1OPM801 TNF1EX4001 TNF1EX4002

PN: TNF6HSNS4T65  TNZ8NS4  TNZ5UNQ2  TNF1LDCAT23  TNF1LDCAT22  TNF3LTX01  TNF2ELOM  TNF1DFIU03  TMB1OPM801  TNF1EX4001  TNF1EX4002

TNF6HSNS4T65 is 1-port 100G universal line service processing board.
With one 100G-DWDM-C ext.-T65-SM-TCFP TNF1C1CFPT65
Applied to Huawei OSN 1800V.
Supports hybrid transmission of OTN and SDH services with a maximum bandwidth of 100 Gbit/s.
Processes and converts the received service signals into one OTU4 signal carried over an ITU-T G.694.1-compliant DWDM wavelength.
The total bandwidth of the board does not exceed 100 Gbit/s, and the total bandwidth for SDH services does not exceed 20 Gbit/s.
Supports ODUk SNCP.
Supports intra-board 1+1 protection (when working with the OLP board).
Supports tributary SNCP protection.
Supports system-side channel inloops and outloops.
Supports WDM-side inloops and outloops.
 ine mode OTN:  80 x ODU0<->ODU4<->OTU4
                          40 x ODU1<->ODU4<->
                          10 x ODU2<->ODU4<->OTU4
                          10 x ODU2e<->ODU4<->OTU4
                           ODU4<->OTU4
                          ODUflex(n=1, 80)<->ODU4<->OTU4
SDH: 8 x STM-16<->8 x ODU1<->1 x ODU4<->1 x OTU4
2 x STM-64<->2 x ODU2<->1 x ODU4<->1 x OTU4
Regeneration mode :  1 x OTU4<->1 x OTU4
Clock synchronization: OTN services: Supported (ODU0/ODU1/ODU2/ODUflex)
SDH services: SDH clock synchronization is supported when SDH virtual ports are configured.
IEEE 1588v2: Not supported

Basic functions: Supports conversion of the following signals:
80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/1 x ODU4<->1 x OTU4
Supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, and ODUflex signals.
Cross-connect functionality : Implements the following service grooming when working with cross-connect boards: 80 x ODU0/ODUflex, 40 x ODU1, 10 x ODU2/ODU2e, 1 x ODU4.
OTN function:  Supports OTU4 interfaces on the WDM side.
Adopts the frame formats and overhead processing methods defined in ITU-T G.709.
Supports the SM function at the OTU4 layer.
Supports the PM and TCM functions at the ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer, and non-intrusive monitoring of PM and TCM overheads.
Performance and alarm monitoring: Monitors BIP8 bytes (burst mode) to help locate line failures.
Monitors parameters such as the bias current, operating temperature, and optical power of a laser.
Monitors OTN alarms and performance events.
Protection scheme: Supports ODUk SNCP.
Supports intra-board 1+1 protection (when working with the OLP board).
Supports tributary SNCP protection.
NOTE:  When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection.

Parameter : Value
Line code format:  ePDM-QPSK(SDFEC2, wDCM-Metro)
Transmitter parameter specifications at point S
Center frequency (THz):  191.3 to 196.05
Maximum mean launched power (dBm): 2
Minimum mean launched power (dBm) : -3
Center frequency deviation (GHz): ±2.5
Maximum -10 dB spectral width (nm): 0.4
Maximum -3 dB spectral width (nm): 0.3
Dispersion tolerance (back-to-back) (ps/nm): 12000
TX OSNR(in band) (dB): 35
Receiver parameter specifications at point R
Receiver type: PIN
Operating wavelength range (nm): 1529 to 1568
Receiver sensitivity (dBm): -18
Minimum receiver overload (dBm): 0
Maximum reflectance (dB): 27
Mechanical Specifications
Typical Power Consumption(W) : 91 (Line Mode) / 89.2 (Regeneration Mode)
Maximum Power Consumption(W): 102.5 (Line Mode) / 98.4 (Regeneration Mode)
Dimension (W x H x D, mm): 193.8 x 40.1 x 205.9
Weight(kg): 1.70 kg

In addition to Huawei TNF6HSNS4T65  TNZ8NS4  TNZ5UNQ2  TNF1LDCAT23  TNF1LDCAT22  TNF3LTX01  TNF2ELOM  TNF1DFIU03   TMB1OPM801  TNF1EX4001  TNF1EX4002, Liyuan Tech supply a wide range of other Huawei transmission board . If you have any need or interest, please feel free to send inquiry to global@chn-liyuan.com